LightCarbon Frame Sizing Guide: How to Use Stack and Reach
By Jeremy Lucas
The short answer: Don't pick a LightCarbon frame by the size number. Pick it by stack and reach. Find the stack and reach of a bike that already fits you, then choose the LightCarbon size that comes closest. Stay within about 10 mm of stack and reach, then fine-tune with stem length and spacers. If you're between sizes, smaller is usually easier to fix than bigger.
Looking for the full charts? Every measurement for both frames, including standover, is on our LightCarbon frame size chart page.
Sizing is the first thing to get right with any Chinese frame. LightCarbon sizes don't line up neatly with Specialized, Trek or Canyon sizes, and a "54" from one brand can fit like a "56" from another. Stack and reach fixes that.
Why Size Numbers Lie
A frame's size number is usually its seat tube length, measured from the center of the bottom bracket. But brands measure it differently, and modern frames have sloping top tubes, so seat tube length tells you very little about how the bike fits when you're on it.
What you actually feel is how far forward (reach) and how high (stack) the handlebars are compared to the pedals. That's why stack and reach are the numbers bike fitters use.
What Stack and Reach Mean
- Stack is the vertical distance from the center of the bottom bracket to the top center of the head tube. Taller stack = higher front end = more upright.
- Reach is the horizontal distance from the center of the bottom bracket to the top center of the head tube. Longer reach = more stretched out.
Two frames with the same stack and reach will put your hands in nearly the same place, regardless of the size number painted on them.
Step 1: Find Your Current Bike's Stack and Reach
Look up your current bike's geometry on the brand's website or on a geometry site like Bike Insights. Find your exact model, year and size. Write down:
- Stack
- Reach
- Your current stem length and how many spacers you run
- Your handlebar reach (the forward distance the bar adds), if you know it
If you've had a professional bike fit, even better. Ask your fitter for your handlebar position numbers, and you can match those directly.
Step 2: Compare to LightCarbon Geometry
LCR020-D aero road
| Size | 49 | 52 | 54 | 56 | 58 |
|---|---|---|---|---|---|
| Stack | 511 | 527 | 544 | 568 | 589 |
| Reach | 375 | 380 | 385 | 395 | 400 |
| Effective top tube | 530 | 540 | 545 | 560 | 580 |
| Head tube | 108 | 121 | 141 | 161 | 181 |
LCG072-D gravel
| Size | S | M | L | XL |
|---|---|---|---|---|
| Stack | 547.3 | 565.3 | 585.2 | 604.9 |
| Reach | 368 | 377 | 385 | 393 |
| Effective top tube | 525 | 539.2 | 553 | 566.6 |
| Head tube | 132 | 147 | 168 | 192 |
All measurements in mm, from LightCarbon's 2026–2027 catalog. We stock the LCG072-D in M (54) and L (56), with S and XL by special order. LightCarbon recommends size M for riders about 170–180 cm (5'7"–5'11").
Step 3: Pick the Closest Size
Find the LightCarbon size whose stack and reach are closest to your current bike. Some rules of thumb:
- Within 10 mm on both: you can usually match your fit with small stem and spacer changes.
- Reach matters more than stack. You can add stack with spacers. Adding reach means a longer stem, which changes handling.
- Too much stack can't be removed. If a frame's stack is already higher than where you want your bars, you can't go lower than slamming the stem. Pick the smaller size.
- Between sizes? Go smaller. A smaller frame with a slightly longer stem or a few spacers usually fits better than a big frame with a short stem.
Worked Example
Say you ride a road bike with 545 mm stack and 386 mm reach, a 100 mm stem and 15 mm of spacers, and it fits well.
The LCR020-D size 54 has 544 mm stack and 385 mm reach. That's within 1–2 mm on both. Order the 54, start with a 100 mm integrated cockpit and the same spacer stack, and you'll be very close to your current fit.
Now say your bike is 560 mm stack and 390 mm reach. You're between the 54 (544/385) and the 56 (568/395). The 54 needs about 15 mm of spacers and a slightly longer stem. The 56 has 8 mm more stack than you want and you can't remove it. I'd go with the 54.
Integrated Cockpits Make Sizing More Important
Both the LCR020-D and LCG072-D use integrated or frame-specific cockpit parts. On the LCR020-D, the bar and stem are one piece. Getting your bar width and stem length right the first time saves money, because you can't swap a $40 stem to test a different length.
LCR020-D integrated bars come in 360, 380, 400 and 420 mm, with stems from 80 to 130 mm. LCG072-D bars come in 380, 400 and 420 mm, with the same stem range.
Don't Forget Saddle Height and Seatpost
Both frames use frame-specific seatposts. Before you cut one, measure your saddle height on your current bike (center of BB to top of saddle, along the seat tube) and make sure the post has enough insertion at that height. Measure twice, cut once, leave a few millimeters extra.
When to Get a Professional Fit
- You don't have a bike that fits well now.
- You have pain in your knees, back, neck or hands on your current bike.
- You're moving from road to gravel, or from an endurance bike to an aero race bike.
- You're spending real money on the frame and build. A fit is cheap insurance.
Questions to Ask Before You Order
- What are my current bike's stack and reach?
- Which LightCarbon size is closest on both?
- What stem length and spacer stack will match my current hand position?
- What bar width do I need? (Usually close to your shoulder width.)
- Does the seatpost have enough insertion at my saddle height?
Let Me Help
Send me your current bike's make, model, year and size, or its stack and reach, plus your stem length and spacer stack. I'll recommend a size and cockpit setup. Text (801) 821-6846, email support@168velo.com, or use the request form.
Bottom Line
Ignore the size number. Match stack and reach to a bike that already fits, get within about 10 mm, and go smaller if you're between sizes. Then pick the right integrated cockpit and you're set.
See the frames: LCR020-D aero road and LCG072-D gravel.
0 comments